Exploding Balloon Kit (6 Exploders & 1 Remote)

Exploding Balloon Kit

includes:

1 pc. Remote Controller

6 pc. Exploders

1 pc. USB-C Cord

1 pc. Instruction Manual

--------------------------------------------------------------------------------------------

**Product Instruction Manual**

Before formal use, be sure to charge it first.

1.When charging, turn on the switch to charge. Generally, it can be fully charged in 20 minutes.

2. When not in use, be sure to turn off the power supply to prevent battery damage due to virtual electricity.

3. It is best to charge it before each formal use to prevent it from being unable to be used due to insufficient power.

4. When pressing the remote control, press it briefly. Do not hold it down all the time, otherwise the code will be cleared.

5. If the remote control cannot be controlled, you can pair the code by yourself to solve the problem.

6. Before use, be sure to test and check it first to ensure that there is no problem with the product before using it, and use it normally after knowing the principle.

7. After turning on the switch, the standby time is preferably controlled within 3 hours. If the time is too long, power consumption is easy and power shortage is likely.

Mark:

1. Controller：

  How to pair the code: 

1. Turn on the exploder;
2. Find out the little black button on the top of the left of the exploder; 
3. Press the little black button, and you will find the red light is off
4. After that, press the button on the controller which is control the exploder. And you will find the red light is flashing; That means the code has been paired

----------------------------------------------------------------------

1. How to clear the code: 

1. Turn on the exploder
2. Find out the little black button on the top of the left of the exploder, and press the little black button (around 8 second) , until the red-light star flash. Clear the code is finished.